National Resistors

Power Rating	1 kW to 3000 kW
Hardware	Zinc plated
Frame Material	Galvanized Steel,MS (CRCA)
Phase	Three Phase
Brand	National Resistors
Material	Fe-Cr-Al (SS-406),SS 304
Usage/Application	For DG Testing,UPS Testing,Transformer Testing,AS Dummy Load
Frequency	50 Hz/60Hz
Temperature	375 C
IP Grade	IP 20
Voltage	414 V-600 V

Minimum order quantity: 1 Unit

Our firm is dedicatedly engaged in manufacturing, supplying and exporting AC Resistive Load Banks Unit. These resistors consist of Copper Nickel alloy wire grid elements that are supported on MS tie rods. Offered resistors are designed and developed so as to provide natural and rapid cooling of resistors bank. Moreover, these resistors are convenient to install and are designed to support various panels in different industries worldwide. Valued patrons can avail Battery Discharge Resistors Unit from us at most affordable prices, ensuring safe transit.

Features and Advantages:

• Discharge cycle tests help the users to:
• Checking the initial battery performances.
• Avoid deterioration of battery systems due to early detection defective cells
• During emergencies guarantee smooth operation of back up systems
• Suitable for improving overall health and life of battery systems.

Constant Current and Rate of Discharge: D.C contractors / Circuit breakers or knife edge switches are used for switching depending on clients preference. The Rate of Discharge can be accurately controlled and monitored in this system which is can be accurately controlled and monitored in this system which has the distinct advantage over other conventional methods of Discharge.

Information Needed For Design:

• Maximum voltage to minimum voltage of battery required to be discharged.
• Current steps required for each step of discharge voltage.
• The material of resistor element.
• Temperature rise allowed.

Ratings: AC & DC Load Banks are manufactured as per customers requirement in various ratings ranging from 1 KW to 3000 KW. (Optional) High-Temperature Limit Thermostat for resistance elements, Thermal overload for each fan and overflow switches are provided.

Construction:
Hot dip galvanized frames fitted with galvanized steel if required otherwise heat resistance aluminum paints are used. All hardware is zinc plated. Stainless Steel hardware is used if required. Frames can be custom made also.

Brand	National Resistors
Usage/Application	DG Testing
Material	Fe-Cr-Al (AISI 406), Cu-Ni, Ni-Cr, AISI-304
Warranty	12 months from commissioning or 18 Months from supply whichever is earlier
Mounting Type	Through Hole
Max. Overload Voltage	10%
Range	230 to 690V AC, 2 MW, 4 MW
Surface Treatment	Soft & annealed
Country of Origin	Made in India

Load banks are the test device that is used to generate dummy loads for generator testing. A load bank is a device which develops an electrical load, applies the load to an electrical power source and converts or dissipates the resultant power output of the source in the  form of heat. A load bank includes load elements with protection, control, metering, and  accessory devices required for operation.

A Resistive load bank provides equivalent loading of both the generator and prime   mover. This means that for each kilowatt (or horsepower) of load applied to the generator  by the load bank, an equal amount of load is applied to the prime mover by the generator. 

Load Banks are available in Single & Three Phases.                 

Required Information from Customer to quote AC load Bank:

• Rated Voltage
• Single Phase or Three Phase
• Total kW/kVA Rating
• No. of Load Steps and its kW Rating     
• Switching device required for Load Steps
• Application
• Load Variation resolution

Brand	National Resistors
Usage/Application	UPS Testing
Material	Fe-Cr-Al (AISI 406), Cu-Ni, Ni-Cr, AISI-304
Warranty	12 months from commissioning or 18 Months from supply whichever is earlier
Mounting Type	Through Hole
Max. Overload Voltage	10%
Range	230 to 690V AC, 2 MW, 4 MW
Surface Treatment	Soft & annealed
Country of Origin	Made in India

Load banks are the test device that is used to generate dummy loads for UPS testing. A load bank is a device which develops an electrical load, applies the load to an electrical power source and converts or dissipates the resultant power output of the source in the  form of heat. A load bank includes load elements with protection, control, metering, and  accessory devices required for operation.

A Resistive load bank provides equivalent loading of both the generator and prime   mover. This means that for each kilowatt (or horsepower) of load applied to the generator  by the load bank, an equal amount of load is applied to the prime mover by the generator. 

Load Banks are available in Single & Three Phases.                 

Required Information from Customer to quote AC load Bank:

• Rated Voltage
• Single Phase or Three Phase
• Total kW/kVA Rating
• No. of Load Steps and its kW Rating     
• Switching device required for Load Steps
• Application
• Load Variation resolution